• Denor Manually operated contactors WCT-25M 2 pole 16A 20A 25A
  • Denor Manually operated contactors WCT-25M 4pole 25A 20A 16A
  • Denor Manually operated contactors WCT-63M 2pole 63A 40A 32A
  • Denor Manually operated contactors WCT-63M 4pole 63A 40A 32A

Modular Contactors Manual Control WCT

WCT Modular Contactors with manually-operated can be used to remote control applications in alternative networks: Lighting,heating,ventilation,roller blinds,sanitary hot water; Mechanical ventilation systems,etc; Load-shedding of non-priority circuits

Category:

Presentation

With exclusive features, Denor WCT DIN rail contactor with manually-operated is definitely geared to absolute safety

  • Continuous safety for operators and unqualified personnel.
  • Compact design and modularization design
  • Rating :16, 20, 25, 40 and 63 A
  • Number of poles: 1P, 2P, 3P, 4P
  • Coil Voltage: 24VAC, 110VAC, 127VAC, 220VAC, 380VAC,etc  50/60Hz
  • Compliance with standards: IEC/EN 61095 and CEI 1095
  • Electrical endurance (O-C): 100,000 cycles
  • Maximum number of switching operations a day: 100
  • Elegant appearance. Amounting instruction diagram is appended for convenient operation
  • No noise during operation
  • Utilization category: AC-1,AC-7a,AC-7b
  • 2 versions: Standard contactors / Manually operated contactors
  • Optional auxiliary: Open-Close indication, interference filtering, dual control, time delay

Benefits

  • Easy to select, with a 1 to 4 poles wide range compliant with DIN standard
  • Peace of mind with the complete modular system
  • Flexible auxiliaries combination  with a simple clip-on system

Applications

  • Control and monitoring of electrical circuits in all industrial, commercial and residential buildings.
  • Control and monitoring of single- or three-phase loads up to 63A.
  • interface between the control gear & power circuits for final circuits such as lighting, heating, roller blind, watering system, ovens, utility motors: ventilation, heat pump etc.

Specifications

Specifications for Manual Control Modular Contactors 25A 40A 63A Denor

 

Warm tips: customized coils voltage can be 12VAC, 24VAC, 110VAC, 127VAC, 220VAC, 380VAC,etc 50/60Hz

 

Operation( Manual Control Contactors )

Manually-operated contactors have a 4-position selector switch on their front face:

• shutdown
• automatic operating mode
• temporary “ON” override
• permanent “ON” override: used to lock the contactor in the ON position during installation maintenance

Operation Instruction for WCT Modular Contactor Manual Control

 Dimension

Dimensions for Manual Control Contactor

If you need a quotation, please complete the form below and submit it to us and we will come back to you shortly.