• Capacitor Contactors CJ19

Capacitor Contactors CJ19

CJ19 series changeover capacitor contactor is mainly applicable to a power line of AC 50Hzor 60Hz, rated working voltage up to 380V. It is used to put a low voltage parallel connectedcapacitor in operation or switch it off in a low voltage reactive power compensation device. Thecontactor is equipped with a surge suppressor, which can effectively reduce the surge currentpassing through the capacitor at weitching on and suppress the over-voltage at switching off.The product is in conformity with the standards IEC947-4-1.

Category:

Presentation

 

Put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at switching on and suppress the over-voltage at switching off.

• Contactors for switching of capacity loads, especially power factor compensation capacitors
• Tested according to IEC / EN 60947-4-1
• 3-pole versions
• Rated current AC-6b up to 95 A
• Coil control voltage 24 — 415 V AC
• Mounting onto DIN rail or onto panel
• Variants for compensation up to 42 kvar at 400 V

 

CJ19 Type Designation Structure

 

To order contactors:
Please specify Denor code plus coil voltage: 24VAC, 110VAC, 127VAC, 220VAC, 230VAC, 380VAC, 400VAC, etc

CJ19 Specification

Technical Data CJ19

Main Technical Parameter

CJ19 Main Technical Parameter

 

Dimensions (mm)

CJ19 Contactor Dimensions

 

Structure Features

Contactor is of direct action type double breakpoint structure, contact system has two layers, there
are three current-limiting contacts at the first layer, together with current-limiting resistance, when
it switches on, the contact will turn on after a few seconds.
CJ19-25~43 have two auxiliary contacts, CJ19~63~95 have three auxiliary contacts.
For CJ19-25~43, Screws are available for installation, as well as the 35mm standard din rail
For CJ19-63~95, 35mm or 75mm standard din rail can be mounted are available for installation

CJ19 Contactor Structure Features

If you need a quotation, please complete the form below and submit it to us and we will come back to you shortly.

    Real Time Analytics